EMERALD PAINT PREMIUM PUTTY EXTERIOR MD

Describe	EMERALD PAINT PREMIUM PUTTY EXTERIOR MD is a fine, fine plaster powder that is specially formulated to smooth and smooth the surface prior to application.
Application	Suitable for repairing defects and creating a smooth surface on concrete, mortar, brick. . before painting. Used for outdoor use
Specifications
Ingredient	Cement: 21-25%
	Mineral powders: 72 – 77.2%
	Additives: 1.8 – 3%
Color	White
Proportion	1.20kg / liter (dry powder)
Theoretical coverage	1.2 – 1.3Kg / m2 / 2 layers (depending on machining surface)
Thickness	1 – 2 mm / layer
Drying time	Dry surface: 2 hours
	Dry: 1 day
Packing	40 kg / bag
Construction Guide
Surface preparation	Surface must be dry (moisture should be less than 16% by Protimeter moisture meter or dry wall surface from 21 to 28 days under normal conditions (average temperature is 300C, humidity is 80%). No dirt, grease, wax or other impurities
Tool	Plate or fly stee
How to mix and mix	Putty: Clean water = 2.4 – 2.6 kg: 1kg Put enough water into the container. Apply from the dough Apply and mix well until the mixture is smooth and homogeneous. If the mixture is too long before application, do not add water to dilute.
Execution	1. Graduated layer 1 with a thickness of 1-2 mm on the prepared surface 2. Layer 2 has the same thickness after the first coat is dry for 1.5-2 hours. 3. After plastering layer 2 for about 1-2 days, proceed to sanding to smooth the surface with suitable sandpaper. After rinsing, use a light brush to coat the outer layer of the coat and then use wet rags or rollers to absorb water then wait about half a day for the dry wall back.
Note during construction	Do not apply to surfaces with temperatures exceeding 400C. If the surface is dry and high absorbency, it should be moistened with clean water and reduce the surface temperature before application. When the powder, it is necessary to observe the powder surface after application, if there is air bubble emerged. Tightly squeeze back and forth when the powder is still wet to remove bubbles on the surface. Do not spread on painted surfaces or surfaces that have been glazed.
Preservation	Store in a cool, dry place, away from direct sunlight, place on a shelf at least 10cm away from the floor.
Storage time	12 months in full condition
Safety and environment	Keep out of reach of CHILDREN. Wear gloves, masks and eye glasses when handling the product and when applied, if it is sticky in the eyes should be washed with clean water and immediately to the doctor. Do not throw the powder into the environment, do not pour the powder down the sewer and water. Carry carefully.
Exclusion clause	The information provided is based on laboratory results and actual experience. However, under different conditions may be a deviation

THÔNG TIN LIÊN HỆ

Related products

Login